Veneer Edge Band

Materials: Veneer
Thickness: 0.3mm-3.0mm width: 15mm-650mm
Color series: Poplar Eucalyptus Pine Hardwood
Surface: matt, high glossy,smooth, embossed, or asdesigned.
Feature: Scratches Resistance,water Resistance,Glossy, beauty,light, stability, Durability
Package: rolls in cartons, 100meter/roll,or 200meter/roll

jalon@pintreegroup.com

Send Request

The form has been submitted successfully!

There has been some error while submitting the form. Please verify all form fields again.

Veneer Edge Band is the perfect finishing touch to veneered edges and panels. Made from real wood, the sheets are expertly joined to create a continuous roll of ready to use trim. We stock a number of popular species, and can special order any exotic species available on the market.

Veneer Edge Band is sometimes a thin strip of veneer, with adhesive on one side, that covers raw and exposed sides of particleboard and plywood. In other cases, edge banding is solid wood (usually from scraps) that is applied with glue or by making a groove in the piece of wood it needs to fit. These bands can be made to match the color of the piece of wood to which they will be applied. When applied with care, edge banding makes the entire plank look like a solid piece of wood.

However, there is one (barely) noticeable feature of Veneer Edge Band, but unless your house guests are inspecting your furniture with a magnifying glass, they likely won’t notice it. Wood had three types of grain: edge, end, and face. Each of these grains run in a different direction, which is how to tell the different types apart.

When using Veneer Edge Band, though, you see edge grain where you would normally see end grain. Now, to the untrained — and even the trained — eye, the difference in the grain is not so stark that it becomes the focal point of a piece. Not to mention, edge banding, regardless of the direction its grain is, is a far more pleasing sight than the raw or exposed edges it is covering.

Veneer Edge Band is used for two reasons: durability and aesthetics. Raw, unfinished edges of plywood and particle board are easier to damage. Edge banding, using either the veneer or solid wood options, reinforces the sides of the piece it is attached to, helping it survive wear and tear better than unfinished wood and protecting it from the elements. Now, you might not think the inside of a cabinet gets as much wear as, say, a tabletop, but when you’re regularly moving pieces in and out of a cabinet or changing shelf heights, it can affect the quality of the piece more than you think. Edge banding can withstand regular bumps, scrapes, and knocks much better than raw edges.

But, more than durability, the most common reason woodworkers and DIY employ edge banding is for the look. Regardless of whether you’re seeing the exposed edge on the piece of plywood you’re working with, having every side of it match in terms of color and texture is important. It takes away the “homemade” look of a project, adding polish and refinement to an otherwise inexpensive piece of wood.

Wood veneer edge band. Thick edge banding includes all edge banding that is 1mm-2mm-3mm in thickness. This product is a layered product that has a consistent color on inner layers but usually is not made of the same wood as the surface veneer. This is the only way to make the product flexible so it can be rolled and shipped. Can be applied manually with contact cement and other adhesives or with automatic edge banding machines.

It is not available with adhesive. The product may retain some “memory” from its rolled form, but will straighten enough to be applied. Makes a beautiful edge that is often desired over thin Veneer Edge Band, which is .020″ or 1/2 mm in thickness and also available in another subcategory.

Free Sample

We manufacture sample boards for many different customers, suitable for a range of different melamine sheet,hpl panel,uv board,fancy plywood,marine plywood,RV plywood,particle board,mdf board etc.

Typically 18mm thick 200mmx200mm plywood or particle board is used, but can be manufactured in any thickness or material requested.We can also help you design sample plates, or sample plate displays.

Lend time: Delivery time about 7-20 days.

Tons of possibilities including:
* Custom melamine Colors
* Custom size
* Custom Lamination
* Custom Veneers available
* Finished or treated edges
* Custom logo(acceptance of agency)
* Custom Decals

All sample boards are CNC manufactured to ensure quality.

We are growing our range each and every day so please do get in touch if you can’t find what you are looking for.Contact us for volume discounts

Get a inquiry

You can order samples of the designs you like so you can see them, feel them and test them for yourself before making your order. If you decide to order your front through us,the samples you get are free of charge, only bear the cost of sample delivery.

The message has been submitted successfully!

There has been some error while submitting the form. Please verify all form fields again.Or contact us directly at pintree@plywoodnest.com

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.